Get your free sub plans here →

Back to the Archives- Making Paint Bucket Seats

I’m linking up with Sweet Rhyme and going back to the archives for this post- making Paint Bucket Seats.

Paint Bucket SeatI originally linked up with 4th Grade Frolics for Monday Made It on August 4, 2013.  I made Paint Bucket Seats for my classroom.

Directions on how to make Paint Bucket SeatsI have really loved using the buckets in my class. One of the problems I had was with the seats. The spray glue came off. I think I will try using the glue gun to reattach the seat to the top of the bucket. I haven’t really had much problem with chipping paint. There are a couple of scratches on the bucket but, not too much. I know some of my coworkers had some problems with scratches. You could always spray paint the buckets again. If you don’t like spray painting you could just buy buckets that are already a color you like and maybe decorate them another way.

Directions for making Paint Bucket Seats

I made six paint bucket seats for my small group table in my classroom. I found this great idea on Pinterest  from Hangin Out in Third Grade (this link doesn’t seem to work anymore).  I needed something smaller than chairs to fit around my small group table.  They were super easy to make and I think my husband had more fun making them then I did!

directions on how to make paint bucket seat

Materials: 6 five gallon paint buckets and lids (they have blue and grey at Lowes), 6  circle boards,  foam, spray paint, spray glue, glue gun, material, and ribbon.

materials o er

Step 1: Take the handles of the buckets. Spray the buckets with spray paint. I used spray paint made for  plastic. It took 2 cans for 6 buckets. If you have a happy trigger finger you might need to buy an extra can.  Make sure to spray paint the edges of the lids also. I taped them off with newspaper and painters tape so I wouldn’t spray the top. (My husband said the glued wouldn’t stick to the spray paint. Not sure.) I let them dry overnight.

spray bucket

If you want to skip the rest of the steps you can also just order bucket lids with a seat. They are called Bucket Lidz and they are sold on Amazon for about $12 a piece .

Step 2: Cut the circles out of particle board. We had some left over Wainscoting in our garage so we used that instead.  My husband just took the lid and traced a circle around the Wainscoting and used his jigsaw to cut them. I read on Hangin’ Out in Third Grade’s Blog that she got her circles precut from Hobby Lobby, but I couldn’t find any there.

wood circles

Step 3: Now it is time to add the foam. The foam I bought was really thick so I split it in half. Then I placed the circles on the foam and traced them. One of the boards hung over but I just used them scraps to piece it together.

foam

Step 4: It is time to take the circles and glue them on to the boards. I used the adhesive glue. It only took a few minutes to dry.

spray

Step 5: Finally its time to attach the fabric. I bought 4 feet of fabric. Cut out a square and attach it to the foam board. I used a glue gun to glue the fabric on the back. Make sure to pull the fabric tight before gluing it on the board.

fabric

Step 6: Attach the fabric boards to the lid. I used the spray adhesive again to attach the lids. Let dry and then snap on the buckets. I also added trim around the bucket for more color.

lids

I had a great time making these buckets. As you can tell my husband helped out a lot. We finished steps 3-6 in about 2 hours.

I hope these directions were helpful. If you have any questions or concerns please comment below.

If you haven’t downloaded my free sub plans make sure to click on the picture to get them.

sub plans

Share it:

Email
Facebook
Pinterest
Twitter

You might also like...